> Delivery to perm less than 2 weeks!
> Screen replacement kit in bundle
> Fully consistent with description
> Ordered for Samsung J3-came up to all 100%
Of the minuses:
> The screen is dull, from the original is different
> Adhesive tape for gluing the screen is too thick, so touch buttons are pressed only when pressed hard
As everyone says, quickly and cheap, the screen is slightly thicker than the original, but the glue sits well, without removing the Chinese tape, it is necessary to put what the thread under all the lower buttons, in my case enough 3 M Scotch
Delivery 20 days in Postamat. The screen works, but not as bright as the original. You have to do all the brightness of Disney. Came with instrumentation and adhesive tape. Glued neatly with glue moment for plastic parts and glass.
A Little different by оттенку, star, because the double sided adhesive tape rear appeared to be crooked glued, had to warm a hair dryer and переклеивать. Well and what I want to even say, display is very fragile, I broke the matrix when приклеевал it. But it is not the seller претензия, blame himself.
The module works fine. picture quality pleases. a little thicker than the original, so not much remained cracks around the edges. you need to glue around the perimeter. in the kit there is a set of tools for removing the old module. delivery 3 weeks to the Nizhny Novgorod region.
The quality of the assembly is not bad. But does not correspond to the size of the original, do not sit tight to have a large slit either from above or from below. And under the sensor in general it was difficult to set, and so that all the rest of it came together. I had to sweat for a very long time to put it. And under the buttons, scotch lay or not delivered to the touchscreen. The button went home, too, or almost failed. Maybe next time i'll take something more expensive, a lot of hemorrhoids)
Parcel reached super fast, quality standards corresponding price. Since the screen is thicker than the native to fit it into the body made touch thinner and key bit sinks. I have more was dried tape frame but I still modules вклеиваю the glue and tape delete.